1. Rumah
  2. Solusi
  3. Comparison Of New And Old Prestressed Carbon Plate Anchors

Comparison Of New And Old Prestressed Carbon Plate Anchors

Comparison Between Old-Style Prestressed Carbon Plate Anchor And Circular Prestressed Carbon Plate Anchor

Circular Prestressed Carbon Plate Anchor


The new generation of circular prestressed carbon plate anchor system has the following application advantages:

1. Lightweight

2. Higher installation success rate

3. Short installation time and fast speed


Circular Prestressed Carbon Plate Anchor


Old-Style Prestressed Carbon Plate AnchorCircular Prestressed Carbon Plate Anchor
The stress distribution is concentrated on the edge, which is easy to damage the carbon plate

The stress distribution is uniform, and the carbon plate is stable under pressure and not easy to be damaged

The clip is large in size and the production cost is high

The clip is small in size, and the production cost is reduced by about 20%

The overall size is large, the weight is heavy, and it is difficult to install

The overall size is reduced by 50%. The weight is reduced by about 62%, and the installation is easy
The slot area is large, and the tension end stroker is slottedThe slot area is small, which is about 60% smaller than the old one


Produk Teranjum Horse Construction

Anda dapat menemukan segala yang Anda butuhkan di sini. Percayalah dan cobalah produk - produk ini, Anda akan menemukan perbedaan yang besar setelah itu.

Lebih Banyak

Sistem Laminasi Serat Karbon Prategang

Sistem Laminasi CFRP prategang Kuda (sistem CFRP pasca-tegang) mencakup perangkat penahan dan laminasi serat karbon yang dirancang khusus untuk jembatan, bangunan, dan tulangan struktur baja.

Lebih Banyak >

Perekat Laminasi Serat Karbon HM-120CP

Perekat laminasi serat karbon Horse HM-120CP adalah perekat berbasis epoxy komponen ganda dengan daya rekat yang kuat, daya geser, dan daya anti-penuaan. Ini adalah epoxy yang digunakan untuk merekatkan laminasi serat karbon untuk penguatan struktural.

Lebih Banyak >

Sistem Penjangkaran Sirkular Laminasi Serat Karbon Prategang

Sistem jangkar sirkular laminasi serat karbon prategang kuda (sistem CFRP pasca-tegang) mencakup perangkat penjangkaran kaku dan laminasi serat karbon yang dirancang khusus untuk jembatan, bangunan, dan tulangan struktur baja.

Lebih Banyak >

Back
Top
Close